poplacf.blogg.se

1. COLT SAA DATE OF MFG SERIAL NUMBERS BELOW
2. COLT SAA DATE OF MFG SERIAL NUMBER MANUFACTURE DATE
3. COLT SAA DATE OF MFG SERIAL NUMBER DATES 1900

They are also related to the centerfire Colt Single Action Army and SAA New Frontier. 22 were introduced in 1970 to replace the earlier Frontier Scout. Illustration courtesy of Colts Mfg.

Colt Saa Date Of Mfg Serial Number Manufacture Date

Once approved, the patent will prevent others from legally copying the design for 20-years. MFG.The savvy inventor will doubtless apply for a patent for his or her new idea, to protect it from being copied by those less inventive but just as capable of producing the product. Colt Saa Serial Number Manufacture Date - imgfil.com/16mped.

Early Colt percussion revolvers were stamped with COLTS PATENT on the left side of the frame but after 1869, when Smith & Wesson’s monopoly on boredthrough cylinders for breech loading revolvers ended, Colt began stamping the dates of patents on their pistols. At that time, the patent protected the inventor for 14-years. Production began the following year in Paterson, New Jersey, by which time an American patent was also in place.

The shape of the grip, hammer, trigger guard and front sight, either individually or in a combination of one or more, are what let down many of the players in the market. While the basic shape of the revolver is easily recognisable regardless of the manufacturer of the reproduction, the attention to detail is what separates the good copies from the mediocre. The pistol is still in production today with only very minor alterations from its inception in 1873.Modern eraColt Single Action Army & Bisley Revolvers, Pre-WWII Production: Year: Serial Number Range: Year: Serial Number Range: 1873: 1-199: 1907: 288000-303999: 1874: 200-14999: 1908: 304000-307999: 1875: 15000-21999: 1909: 308000-311999: 1876: 22000-32999: 1910: 312000-315999: 1877: 33000-40999: 1911: 316000-320999: 1878: 41000-48999: 1912: 321000-324999: 1879: 49000-52999: 1913: 325000-327999: 1880: 53000-61999Clones of the Colt SAA revolver, known by enthusiasts as the Peacemaker, are by far the most commonly used revolvers amongst aficionados of the American West, whether they are shooters or members of the re-enactment fraternity. These ‘conversion’, along with the 1872 Open Top, their first attempt at a big bore cartridge revolver, served to keep them in the changing handgun market, while they designed and developed what was to become the standard side arm of the US Army for almost two decades – the Colt Single Action Army revolver.

Although some early Italian Peacemakers had the Colt address rolled on the barrel, presumably Colt put a stop to it, as the practice seems to have disappeared. Its overall appearance has remained consistent since 1873.One area where the modern clones do not mimic the originals, is in the barrel markings. The Colt SAA has been offered in over 30 different calibers and various barrel lengths. Government service revolver trials of 1872 by Colt's Patent Firearms Manufacturing Companytoday's Colt's Manufacturing Companyand was adopted as the standard military service revolver until 1892. Never before in history has an effort.It was designed for the U.S. But the modern Westerner is much better informed and much more likely to insist on greater accuracy when choosing his (or her) equipment.Standard Mfg Single Action Revolver 45 Colt 5.5 Barrel, Blue/Case Hardened, Walnut 1 Pc Grip.

Many shooters and re-enactors will doubtless have noticed these markings without realising their significance.Colt Peacemaker Single Action Army SAA Mfg 1900. Armi San Marco, Pietta and Uberti have all at some time stamped the frames of their copies of this icon, both as firearms and blank firers, with a set of these dates. But one set of markings from the originals has been copied on today’s reproductions and that is the abovementioned patent dates on the left side of the frame.

Colt Saa Date Of Mfg Serial Number Dates 1900

Colt Saa Date Of Mfg Serial Numbers Below

The dates and serial numbers below are applicable to the stampings on the Colt Single Action revolver, or Peacemaker. Some of these markings will be found on the many thousands of Colt percussion revolvers, both large and small, that were converted to fire metallic cartridges. 45 Colt Single Action Army serial number dates 1900 4 inch barrel.During the production of what are termed ‘First Generation’ Peacemakers (1873-1940) four different arrangements of patent dates were to be found on original Colts, covering four patents applied to the revolver.

So, we have four different patents mentioned for this revolver, two credited to Charles B. 19, 75 This final setup is the one used on today’s Colts and is often seen on modern reproductions. 19, 1875 The final configuration, used until production ceased at number 357,859 (the accepted production figure for First Generation guns), reverted to a two-line arrangement but with the three above dates: PAT. JThe next variation, which ran until 1890 and approximately serial number 135,350, was: PAT. JFrom then up until 1877 or approximately serial number 33,000 the stamping was thus: PAT.

38 Hand Ejector model revolver.In 1866 he left Remington and began Work as Colt’s Armoury Superintendent, where, together with Charles Richards, he initiated the process of converting Colt percussion revolvers to accept metallic cartridges. The design was used by Smith & Wesson in 1896 for their. In November of that year he was granted a patent for a revolver with a swing-out cylinder and the star ejector system to eject spent cases. Richards & MasonWilliam Mason began his career as an apprentice patternmaker and by 1865 found himself employed by the Remington Arms Company.

Resubmitted for Army trials, the new revolver was approved in 1872 and the legendary Colt Single Action Army began its illustrious career. The Army rejected the open frame layout, so Mason quickly adapted the design to incorporate a top strap. This was a purpose-built cartridge revolver, intended for submission to the Army.

He served as United States Commissioner at the 1889 Paris Exposition, an event that saw the unveiling of the Eiffel Tower. Richards retired from Colt in 1880 to become a founder member of the American Society of Mechanical Engineers, serving as its vice-president from 1888-1890. The two men were also responsible for Colt’s large frame doubleaction Model 1878 revolver. He teamed up with William Mason to improve these conversions – resulting in the ‘Richards- Mason Conversions’ – with the pair eventually working together to perfect the Peacemaker. Around 2-line 2 date marking 3-line marking 9,000 of the ‘Richards Conversions’ were eventually made. After the outbreak of the Civil war in 1861, he found himself again working for Colt, eventually reaching the position of Superintendent of Engineering.His first major design for Colt was a conversion of the Model 1860 Army revolver to take metallic cartridges.

The first three items were used extensively on the conversion revolvers but this jointed hand never seems to have made it to production, as the next patent in the list negated its use.US patent No. The inventor claims four specific areas for his patent: the slot in the end of the ejector tube the flange on the ejector tube, which used the holes and recesses made for the percussion rammer and lever arm to attach it to the pistol the projection in the recoil plate, which contained the firing pin and a peculiar jointed hand to turn the cylinder. The first date, July 25th, 1871, refers to patent number 117,461, granted to Charles B. The patentsWe’ve seen the markings on the guns and met the men responsible, so now let us look at the patents themselves.

The foregoing is only a brief summary of the patents mentioned. Dynamic duoSo, there we have it, the combined talents of two inventive men, building upon the basis of Sam Colt’s 1851 Navy design to bring us one of the World’s most recognisable and enduring firearms, still being produced today over 140-years after its inception. 158,937) concerning the Colt SAA revolver was issued to him on and covers three features- the method for holding the ejector tube in place (a boss on the barrel into which a screw passes transversely through the tube, combined with a recess in the frame into which the rear of the tube extends) the arm on the loading gate, with two flats at almost right angles to each other, along with a spring in the frame which will hold the gate open or closed, depending on which flat is presented to the spring and the ‘semispherical’ shape of the rear of the frame, with the loading gate contoured to match this shape.